PartsAvatar Discloses Peculiar Causes behind Car Breakdown and Ways to Prevent them.

Want to know the most basic causes behind frequent breakdowns of your car? Save your money on expensive repairs and mechanics. – Partsavatar Vehicle Parts.

 We rely on your vehicles way too much. So it is possible that your car will cut out on you when you are driving down the road. You can avoid breakdowns and prevent your car from being town away by towing truck by knowing causes behind this. It is very important to keep servicing and checking your vehicle. Let’s have a look at some frequent causes and their remedies.

Dead Battery

This problem is one top of my list of causes. Sometimes when in the morning you turn the key and nothing happens. You just keep on repeating the process until you get sick of it and decide to call your mechanic.Don’t worry.

Battery can get damaged from regular short trips. It is very important to take a long drive at least one a week. Even poor electrical connections can result in battery damage. This problem frequently occurs in winters.

You can prevent the battery from getting damaged by taking long trips because the car’s alternator needs time to recharge your battery every time you drive. Short journeys drain the battery faster than the longer. You can sort this out by charging the battery overnight for every 2 weeks. These ways you will be able to keep it running longer.

Check the connections are secure and the battery terminals are clean and protected from corrosion. Loose or corroded connections need special attention to keep your car going.

You can Shop for good brand aftermarket car battery and its components at parts avatar Canada.

Flat Tire

Sometimes it is too late to check a flat tire after the damage occurs and the rim is already on the ground.The worst is you are left stranded on the road. Do routine check up on your tire.

Even a single nail could cause the tire to go flat. So inspect for any debris on the surface of the tire. There are certain things that are important to inspect as follows.

1. Tread depth:  check your tire’s tread depth of car regularly. Take a penny to check the low tread depth. Tread depth should be at least 1.6 mm.

2. Uneven wear: if the tread pattern is unusual or the depth is varying from tire to tire then let the tires checked or replaced if needed.

In case of heavy loads, make sure you adjust the tire pressure of car's tire to cope with the change. Owner’s manual provides information regarding tires so you can take its help.

You can install electric equipment like TPMS in your car .car's Tire pressure monitoring system sensors sense the under inflated tires and let you know it via an electric signal.

Overheating

Several reasons could cause a car to overheat. Damaged cooling system might cause the car’s engine to get overheated and ultimately the engine breaks down.It is strongly advised that if you notice that your car is overheating, do not continue to drive as you might be damaging other parts along with the engine.

Sometimes leaks in radiator or improper level of coolant fluid cause overheating of the engine. You can notice leaks around radiator welds or hoses. Visit you mechanic for replacement of car radiatorand car radiator hosesor automotive coolant.

You can further check the thermostat by feeling the upper radiator hose when the engine has warmed up. If you notice that the hose is still feeling cool then the thermostat is stuck shut. Repair or replace the auto thermostat as recommended by your mechanic.

Sometimes the air entering the cooling system via leaks could cause the engine to overheat. Hence due to air lock, the cooling system stops circulating the coolant and the remaining coolant inside the engine becomes superheated. So, it is very important to inspect the leaks.

The foreign objects or mineral deposits that block the radiator could cause the engine to overheat as it hinders the flow of coolant.

Water pump failure is one of the most common and regular cause for engine overheating. If the water pump is showing the signal of wear or breakage, engine starts overheating.The water pump wears quite often so you may need to change the car's engine water pump periodically.

In cold weather, coolant gels up inside the engine or radiator and cause a blockage. It can also cause internal damage in components like radiator.

Overheating could cause serious engine damage so it is very important to be proactive. Fill the coolant to the proper level and flush out the dirty coolant or fluid that causes the system to overheat. Do not drive an overheated vehicle as you will just damage the entire engine by doing so.

Clutch Cables

If you feel unusually weird while pressing the pedal, there might be some problem with the clutch cable. It is not a good sign.

If you notice a worn or stiff clutch cable then after applying additional pressure on the pedal, it might break. So be careful with hard pedals.

When you are driving up the hill, the car may slip in or out of gears. Clutch cables might have worn out so replace them before it becomes too dangerous for you to drive. Partsavatar offers durable car clutch cables, have a glance.

If you notice jerking of vehicle on slow speeds, slipping of gears or stiff pedals, then get your clutch cables checked by a professional.

Failing starter motor

We sometimes assume the reason behind the stalled vehicle might be failed radiator. But it might be starter.

Starter often produces grinding noise if the starter drive gear is worn out. Do not avoid it as it may damage flywheel if ignored.

When you turn the key and nothing happens, or you turn the key to crank the engine and the engine turns over slowly and stops. The starter motor has been damaged. Call your mechanic immediately and get the starter motor of car or even car starter replaced if necessary. Parts avatar offers free shipping on starters so get the benefit.

Insufficient lubrication

Every engine needs oil not only reduce friction but also to carry away the heat. The oil is primary means by which the rods, pistons and bearings are cooled. So any reduction or improper lubrication may cause these parts to run hot or seize.

Low oil pressure often causes engine failure. You should not starve the engine for oil as this result in failed oil pump, a plugged oil pickup screen inside the oil pan or low oil level.

Keep your engine moving with regular oil change and always choose high quality oil for your car’s engine and its lubrication.

Visit PartsAvatar Canada for Aftermarket Performance and replacement auto parts and accessories at budgetary prices with high reliability.

Is an OEM Starter worth buying?? Know the Pros and Cons of New Starter VS Re-manufactured Starters @Parts Avatar

Is starting your car becoming difficult?Need a Re-manufactured or a New Starter? Learn about the difference between them here – Partsavatar.ca Vehicle Parts.

Car starter is a pivotal component of starting process of your vehicle. It is generally located at the rear of the motor. The gear on the starter is responsible for the ignition process to give life to the engine. Thus any damage to starter may just cost the life of engine and eventually your car won’t move. So, when it comes to replacement options, there is variety of choices before the customer in the form of New, Re-manufactured or Rebuilt starters. Opinions over the choice vary from customer to customer. So, in this article, Parts avatar tries to differentiate between New and Re-manufactured starters in this article along with the symptoms of a bad starter.

It should be noted that auto parts whether brought aftermarket or from original dealer that are up to the standards and specifications of your vehicle will give you proper performance otherwise you are just dumping your money if you do not consider the standards carefully.

Let us read about starter’s failing symptoms.

What are failing symptoms of Starters?

When the starter begins to wear out it will directly impact your ability to drive the car. The main components that are majorly damaged inside the starter are it solenoid and starter motor. Though, the parts can be repaired or fixed individually but it is advised to replace the whole starter to prevent future breakdown.

Noted below are the symptoms of a failing starter.

1. Grinding noise when starting the motor

The noise is often produced when the gears that connect the starter to the flywheel are worn out. If you hear grinding noise, you should call your mechanic immediately as if the problem is with starter motor then it could spread to automotive flywheel hence damaging it. The repairing cost of flywheel along with starter would be quite expensive. Call the mechanic as soon as you notice the sound and get your starter motor of car and flywheel replaced.

2. Smoke when starting the motor

Sometimes you may notice smell or smoke coming from underneath the engine. This problem may have been caused by short circuit or blown fuse in ignition system or even overheating of car's engine. Basically, the starter needs electricity for its operation. Sometimes, it gets overheated because of continuous power supply to the starter.In this case, along with the starter, the engine and ignition system parts also get damaged. So switch off the engine and call the mechanic immediately.

3. Starter activates but does not spin the motor

Sometimes when you turn the ignition switch, the motor does not spin.There may be problem with the gears. Either the gear has been stripped or has been dislodged against the flywheel. You may need starter replacement either way. Contact your mechanic to inspect the problem for you.

4. When you turn your key and nothing happens

It is the most common symptom. There are many causes behind this issue. Some are bad battery, electrical problems or worn solenoid or starter motor. Call your mechanic and let him decide what the real issue is without wasting the time.

So when your car shows signs of problems when starting, there may be issues with battery or ignition systems. It is better to have them replaced or checked if necessary. You can get aftermarket car battery and auto ignition system parts at budgetary prices.

Remanufactured VS New Starter

Re manufactured starters are virtually indistinguishable from new ones. Rebuilt ones generally have high degree of reused components.As we have choice, we are often confused. The major thing is make and model of your car. If the product is not up to your car’s specifications, then it is just waste of money. Lets us read about pros and cons of re-manufactured and new starters.

Remanufactured

We are often suggested by our mechanic to buy a new starter. But remanufactured starter motors are built for extreme heat and cold. Remanufactured starter manufacturers often say that remanufactured products are indistinguishable from the new ones.

Basically when the remanufactured, the worn out internal components are replaced.Auto parts companies remanufacture the starters keeping in mind that the end product of this remanufacturing process should meet all the specifications of new unit. Many aftermarket auto part stores offer car's remanufactured starters at lucrative prices. So based on your vehicle’s specification, you can replace them with remanufactured starters.

Pros

1. As it has undergone major replacement and teardown of damaged components with the new ones, they offer same warranty as the new starters.

2. Even though remanufacturing is the job of third party companies, but some OE suppliers have also stepped in this process.

3. As they meet the standards and specifications of the new one, so they can be expected to last as long as the new starter.

4. Remanufactured starters provide optimum starting performance of the engine.

5. Each unit is remanufactured using the highest quality material and advanced technology.

6. Every component is 100% factory tested prior to remanufacturing to ensure that it meets the standards of the new one.

7. Their cost is quite cheap as compared to the original or new starter.

8. Sometimes for old cars or trucks, the remanufactured parts are the only option as the new products are not available of that standard. So in this case, remanufactured starters can be used easily.

Cons

1. One of the major cons of the remanufactured starters is its warranty. The warranty will not be as good as the new one offer. But, warranty is not an issue if you buy the remanufactured starter from a trusted store and it works properly.

2. You may not know if the product is tested according to original specifications. It is advised to make sure the manufacturer had tested the product before shipping.

New Starters

Mostly, when there is any issue with our car’s starter we often think to replace it with the new car starter.Though the end result of both new and remanufactured starter is the same,but the thing matters is the trusted brand and warranty they offer.So, there are some pros and cons of the new starters.

Pros

1.The major benefit of buying a new starter is the warranty and guarantee offered by the manufacturer. New starters often exceed the OE part installed by the vehicle manufacturer.

2. The specifications perfectly match with the make, model and design of your vehicle, so you need not worry about the standards.

Cons

The major con of new starters is there price is high as compared to the re-manufactured starters.

Ending note

Rebuilt starters may or may not meet the standards of original ones. So, it should be checked if they are properly tested before installing rebuilt starters.

Between Re-manufactured and New starter, the choice is yours. You can buy new starter because you see the trust and warranty of their product or you can opt for re-manufactured one if you prefer product reliability and value.As long as the starter fits your vehicle’s specifications and performs properly, cost does not matter. But the choice can be made wisely, as there is not much difference between both.

Partsavatar hopes that this guide will help of choose the starter easily. You can shop for other aftermarket or replacement auto products or accessories here at cheap prices. Get the benefit of free shipping for shopping over $99.